JNC350R41-TZ Lineage Power, JNC350R41-TZ Datasheet - Page 12

• Manufacturer Part Number: JNC350R41-TZ
• Description: DC/DC Converters & Regulators 350W 24V-28V 12.5A NegLogic TunableLoop
• Manufacturer: Lineage Power

Specifications of JNC350R41-TZ

• Output Power: 350 W
• Input Voltage Range: 18 V to 36 V
• Input Voltage (nominal): 24 V
• Output Voltage (channel 1): 28 V
• Output Current (channel 1): 12.5 A
• Package / Case Size: Half Brick
• Output Voltage: 28 V
• Product: Isolated
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: CC109158457

Data Sheet
August 9, 2010
Layout Considerations
The JNC350R power module series are aluminum
base board packaged style, as such; component
clearance between the bottom of the power module
and the mounting (Host) board is limited. Avoid
placing copper areas on the outer layer directly
underneath the power module.
Post Solder Cleaning and Drying
Considerations
Post solder cleaning is usually the final circuit-board
assembly process prior to electrical board testing. The
result of inadequate cleaning and drying can affect
both the reliability of a power module and the
testability of the finished circuit-board assembly. For
guidance on appropriate soldering, cleaning and
drying procedures, refer to Lineage Power Board
Mounted Power Modules: Soldering and Cleaning
Application Note.
LINEAGE
POWER
18 – 36 Vdc Input; 28Vdc Output; 350W Output
JNC350R Power Modules; DC-DC Converters
Through-Hole Lead-Free Soldering
Information
The RoHS-compliant through-hole products use the
SAC (Sn/Ag/Cu) Pb-free solder and RoHS-compliant
components. They are designed to be processed
through single or dual wave soldering machines. The
pins have an RoHS-compliant finish that is compatible
with both Pb and Pb-free wave soldering processes.
A maximum preheat rate of 3C/s is suggested. The
wave preheat process should be such that the
temperature of the power module board is kept below
210C. For Pb solder, the recommended pot
temperature is 260C, while the Pb-free solder pot is
270C max. Not all RoHS-compliant through-hole
products can be processed with paste-through-hole
Pb or Pb-free reflow process. Before attempting this
soldering process, please consult with your Lineage
Power representative for more details.
12