PIC-LCD3310 Olimex Ltd., PIC-LCD3310 Datasheet - Page 13

• Manufacturer Part Number: PIC-LCD3310
• Description: MCU, MPU & DSP Development Tools DEV BRD FOR PIC18F67J50
• Manufacturer: Olimex Ltd.

Specifications of PIC-LCD3310

• Processor To Be Evaluated: PIC18F67J50
• Data Bus Width: 8 bit
• Interface Type: USB, I2C, SPI, USART
• Dimensions: 65 mm x 65 mm
• Operating Supply Voltage: 2 V to 3.6 V
• Tool Type: Development Kit
• Core Architecture: PIC
• Cpu Core: PIC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 1701536 25R4922

UEXT:
TX1
RX1
SCK2/SCL2 I/O
data transfer. When the pin is used for communication through SPI2, the name of the signal is
This could be either input or output depending on whether the MCU is master or slave.
MISO2/SDA2 I/O
communication through SPI2 interface, its name is MISO and if the communication is through I2C
interface its name is SDA. In case of SPI this could be either input (MCU is master) or output (MCU is
slave). In case of I2C this could be used as both input and output depending on the data flow
direction.
MOSI1
SPI1 interface, in which case this is either data output from the MCU (when it is master) or data input
for the MCU (when it is slave).
SCK1
transfer. If this pin is used for communication through SPI1, it could be either input or output
depending on whether the MCU is master or slave.
SCK2 and when the communication is through is through I2C, the name of the signal is SCL2.
Output
Input
I/O Serial (Synchronization) Clock 1. This is the synchronization clock for the data
I/O
1
2
3
4
5
6
7
8
9
10
Pin #
Transmit Data 1. This is the output data line for the UART1.
Receive Data 1. This is the input data line for the UART1.
Serial (Synchronization) Clock 2. This is the synchronization clock for the
Master In Slave Out 2/Serial Data 2. When this pin is used for
Master Out Slave In 1. This pin could be used for communication through
+3.3V
GND
RC6/TX1
RC7/RX1
SCK2/SCL2
MISO2/SDA2
MISO1
MOSI1
SCK1
RE4/CS_UEXT
Signal Name
Page 13