MRF24J40MA-I/RM Microchip Technology, MRF24J40MA-I/RM Datasheet - Page 14

• Manufacturer Part Number: MRF24J40MA-I/RM
• Description: MODULE RF TXRX PICTAIL PLUS
• Manufacturer: Microchip Technology

Specifications of MRF24J40MA-I/RM

• Frequency: 2.4GHz
• Data Rate - Maximum: 250kbps
• Modulation Or Protocol: 802.15.4
• Applications: ISM, ZigBee™
• Power - Output: 0dBm
• Sensitivity: -94dBm
• Voltage - Supply: 2.4 V ~ 3.6 V
• Current - Receiving: 19mA
• Current - Transmitting: 23mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: On-Board, Trace
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Wireless Frequency: 2.4 GHz
• Interface Type: 4-Wire SPI
• Output Power: + 3 dBm
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Modulation: OQPSK
• Frequency Range: 2.405GHz To 2.48GHz
• Data Rate Max: 250Kbps
• Module Interface: SPI, 4-Wire
• Supply Voltage Range: 2.4V To 3.6V
• Supply Current: 23mA
• Operating Temperature Range: -40°C To +85°C
• Rohs Compliant: Yes
• Sensitivity (dbm): -94dBm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: MRF24J40MA; MRF24J40MA

pattern. Figure 2-9 shows the simulation drawing and
radiation patterns, respectively. As shown by the
radiation patterns, the performance of the antenna is
MRF24J40MA
2.3
The PCB antenna is fabricated on the top copper trace.
Figure 2-8 shows the trace dimensions. The layers
below the antenna have no copper traces. The ground
and power planes under the components serve as a
counterpoise to the PCB antenna. Additional ground
plane on the host PCB will substantially enhance the
performance of the module. For best performance,
place the module on the host PCB following the
recommendations in Section 1.2 “Mounting Details”.
The Printed Circuit Board (PCB) antenna was designed
and simulated using Ansoft Designer
full-wave solver software by Ansoft Corporation
(www.ansoft.com). The design goal was to create a
compact, low-cost antenna with the best radiation
Figure 2-10 and Figure 2-11 show the 2D and 3D
dependant upon the orientation of the module.
Figure 2-12 shows the impedance simulation and
Figure 2-13 shows the actual impedance measurement.
The discrete matching circuitry matches the impedance
of the antenna with the MRF24J40 transceiver IC.
FIGURE 2-9:
DS70329B-page 12
PCB Antenna
X
PCB ANTENNA SIMULATION DRAWING
Z
®
and HFSS™ 3D
Advance Information
FIGURE 2-8:
11.0 mm
2.0 mm
5.0 mm
PCB ANTENNA
DIMENSIONS
16.5 mm
2.5 mm
© 2008 Microchip Technology Inc.
Y
4.0 mm