AXT650124 Panasonic Electric Works, AXT650124 Datasheet - Page 62

• Manufacturer Part Number: AXT650124
• Description: CONN HEADER F4S .4MM 50POS SMD
• Manufacturer: Panasonic Electric Works
• Series: F4Sr

Specifications of AXT650124

• Connector Type: Header, Center Strip Contacts
• Number Of Positions: 50
• Pitch: 0.016" (0.40mm)
• Number Of Rows: 2
• Mounting Type: Surface Mount
• Features: Solder Retention
• Contact Finish: Gold
• Mated Stacking Heights: 1mm
• Height Above Board: 0.033" (0.84mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Contact Finish Thickness: -
• Other names: 255-2399-2

SPECIFICATIONS
1. Characteristics
2. Material and surface treatment
http://www.mew.co.jp/ac/e/
Electrical
characteristics
Mechanical
characteristics
Environmental
characteristics
Lifetime
characteristics
Unit weight
Molded portion
Contact and Post
Retention fitting portion
Part name
Rated current
Rated voltage
Breakdown voltage
Insulation resistance
Contact resistance
Composite insertion force
Composite removal force
Post holding force
Ambient temperature
Soldering heat resistance
Thermal shock resistance
(header and socket mated)
Humidity resistance
(header and socket mated)
Saltwater spray resistance
(header and socket mated)
H
(header and socket mated)
Insertion and removal life
Item
2
S resistance
LCP resin (UL94V-0)
Copper alloy
Copper alloy
Material
0.3A/contact (Max. 5 A at total contacts)
60V AC/DC
150V AC for 1 min.
Min. 1,000MΩ (initial)
Max. 70mΩ
Max. 0.981N {100gf}/contacts × contacts (initial)
Min. 0.0588N {6gf}/contacts × contacts
(Mated height 1.5 mm, without removal and retention
fitting)
Min. 0.118N {12gf}/contacts × contacts
(Mated height 1.5 mm, except without removal and
retention fitting)
Min. 0.981N {100gf}/contacts
–55°C to +85°C
Max. peak temperature of 260°C (on the surface of the
PC board around the connector terminals)
300°C within 5 sec. 350°C within 3 sec.
5 cycles,
insulation resistance min. 100MΩ,
contact resistance max. 70mΩ
120 hours,
insulation resistance min. 100MΩ,
contact resistance max. 70mΩ
24 hours,
insulation resistance min. 100MΩ,
contact resistance max. 70mΩ
48 hours,
contact resistance max. 70mΩ
50 times
Mated height 1.5mm, 20 contacts;
Socket: 0.04g Header: 0.02g
Contact portion: Ni plating on base, Au plating on surface
Terminal portion: Ni plating on base, Au plating on surface (Except for thick of terminal)
However, upper terminal of Ni barrier production: Exposed over Ni
The area adjacent to the terminal of the sockets on models with Ni barrier is exposed to Ni on base.
Ni plating on base, Sn plating on surface (Except for front terminal)
Specifications
Surface treatment
Matsushita Electric Works, Ltd.
Detection current: 1mA
Using 250V DC megger (applied for 1 min.)
Based on the contact resistance measurement method
specified by JIS C 5402.
Measures the maximum load in the post axial direction
until removal
No freezing at low temperatures
Infrared reflow soldering
Soldering iron
Sequence
1. –55 °C, 30 minutes
2. ~ , Max. 5 minutes
3. 85 °C, 30 minutes
4. ~ , Max. 5 minutes
Bath temperature 40±2°C,
humidity 90 to 95% R.H.
Bath temperature 35±2°C,
saltwater concentration 5±1%
Bath temperature 40±2°C,
gas concentration 3±1 ppm,
humidity 75 to 80% R.H.
Repeated insertion and removal speed of max. 200
times/hours
—
+3
0
–3
0
Conditions
AXK7, 8
65