MT5656ZDX Multi-Tech Systems, MT5656ZDX Datasheet - Page 40

• Manufacturer Part Number: MT5656ZDX
• Description: MODEM V.92 DATA/FAX
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® ZDXr

Specifications of MT5656ZDX

• Data Format: V.92
• Interface: RS-232
• Voltage - Supply: 9V
• Mounting Type: Desktop
• Package / Case: 5.7" L x 4.3" W x 1.0" H (145mm x 109mm x 25mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1020

V.8 is a way V.34 modems negotiate connections features and options, and V.8bis is a start-up sequence for
multimedia modems.
Command: +A8E
Description:
Values:
Default Values:
Report Commands:
Command: +A8I
Description:
Values:
Example:
Multi-Tech Systems, Inc. AT Commands Reference Guide (S000273F)
Chapter 4 – V.8 / V.8bis Commands
V.8 and V.8bis Operation Controls
This command is defined for two conditions: as a parameter while the modem is on-hook,
and as an action command while the modem is off-hook. If enabled, V.8 negotiation does
not preclude simultaneous implementation of other negotiation means (e.g., V.8bis, V.18,
V.32bis Annex A). It is a compound parameter if issued while the modem is on-hook, used
to precondition V.8 and V.8bis originating and answering operation. It is issued by the
DTE before the Dial (D) or Answer (A) command, regardless of the state of the +FCLASS
parameter. This command is an action command if issued while the modem is off-hook to
(re)start V.8 or V.8bis negotiation.
Example: If initial V.8 negotiation fails, but subsequent T.30 negotiation indicates V.8
capability, this command may be used to initiate V.8 negotiation.
Syntax: +A8E=<v8o>,<v8a>,<v8cf>[,<v8b>][,<cfrange>][,<protrange>]
<v8o>
<v8a>=
<v8cf>=
<v8b>=
<cfrange>=
< protrange >= <string of values>“. Applicable only for <v8a>=5. Not supported.
1,1,00,1,0,0
The ATD and ATA commands behave as specified in V.250, and +A8n indications are not
generated by the modem. For subparameter values <v8o>=6 and <v8a>=5, +A8I
indications are issued during the V.8session to notify the DTE when the relevant V.8
signals are received.
+A8E? Reports current or selected values.
+A8E=? Reports supported range of parameter values.
CI Signal Indication
This indication is issued by an answering modem, if +A8E,<v8a> .0, to indicate detection
of a V.8 CI signal and report the recovered Call Function octet(s).
Indication Syntax: +A8I:<v8cf><CR>
<v8cf>
+A8I:0
+A8I:X YYY
The modem timed out waiting for CI.
A hexadecimal code octet representation of those Call Function octet(s).
+A8I:0 indicates that the modem timed out waiting for CI.
Decimal number which enables/disables issuance of +A8x indications
during modem-controlled V.8 origination negotiation.
1
6
Decimal number which enables/disables issuance of +A8x indications
during modem-controlled V.8 answer negotiation.
1
5
Set the V.8 CI signal call function to the hexadecimal octet XY
00
21
C1
Decimal number which enables/disables V.8bis negotiation.
0
1
“<string of values>“. Applicable only for <v8a>=5. Not supported.
Enable DCE-controlled V.8 origination negotiation without +A8x
indications. Default
Enable DCE-controlled V.8 origination negotiation with +A8x
indications.
Enable DCE-controlled V.8 answer negotiation without +A8x
indications. Default
indications.
Default
Disable V.8bis negotiation.
Enable V.8bis negotiation. Default
Enable DCE-controlled V.8 answer negotiation with +A8x
Chapter 4 – V.8 / V.8bis Commands
40