MT5656ZDX Multi-Tech Systems, MT5656ZDX Datasheet - Page 19

MODEM V.92 DATA/FAX

MT5656ZDX

Manufacturer Part Number
MT5656ZDX
Description
MODEM V.92 DATA/FAX
Manufacturer
Multi-Tech Systems
Series
MultiModem® ZDXr
Datasheets

Specifications of MT5656ZDX

Data Format
V.92
Interface
RS-232
Voltage - Supply
9V
Mounting Type
Desktop
Package / Case
5.7" L x 4.3" W x 1.0" H (145mm x 109mm x 25mm)
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
881-1020
Caller ID Commands
Command: +VCID=n Caller ID Selection
Values:
Default:
Description:
Command: +VRID= Caller ID Report Retrieved
Values:
Default:
Description:
Callback Security Commands
Note:
Command: #CBNn=[-]x Store Callback Number
Values:
Default:
Description:
Command: #CBPn=x Store Callback Password
Values:
Default:
Description:
Command:
Values:
Default:
Description:
Multi-Tech Systems, Inc. AT Commands Reference Guide (S000273F)
Callback Security Commands apply to the MT5600BA and MT5600 BR only.
#DBn
n = 0, 1, or 2
0
Enables Caller ID detection and configures the reporting and presentation of the Caller
ID data that is detected after the first ring. The reported data includes the date and time
of the call, the caller's name and number, and a message. Set S0=2.
+VCID=0 Disables Caller ID.
+VCID=1 Enables Caller ID with formatted data.
+VCID=2 Enables Caller ID with unformatted data.
+VCID=? Displays the allowed values.
+VCID?
0, 1
0
This command reports the data associated with the Caller ID services in the Incoming
Call Line ID (ICLID) data format for the last received call.
+VRID=0 Reports Caller ID with formatted presentation to the DTE. Data includes
+VRID=1 Reports Caller ID with unformatted presentation to the DTE.
+VRID=? Displays the supported range of parameter values.
+VRID
Callback Enable/Disable
n = 0 or 1
0
Enables or disables callback security. When callback security is enabled, phone number
memory locations 0–4, used for quick dialing and DTR dialing, become unavailable and
are replaced by callback security memory locations 1–30. The phone number memory
locations and their contents are restored when callback security is disabled.
#DB0 Disables callback security.
#DB1 Enables callback security.
n = 01–30
x = password (6–10 characters)
None
Stores callback security password x in memory location y. The password must have 6
to 10 characters. Example: AT#CBP01=gilamep.
Note:
n = 01–30x = dialing string
None
Stores the callback dialing string x in a memory location. The dialing string can
include the digits 0 through 9 and any of the following characters:
#, *, comma (,), semicolon (;), W, A, B, C, and D.
Up to 30 characters can be used.
Example:AT#CBN01=9,16127853000.
If the optional - character precedes the dialing string, and the caller appends the
same character to the password, the caller is immediately connected.
A direct connect password may not end with a hyphen (-).
Displays the current values.
date, time, name, and telephone number.
Displays Caller ID information of the last call received.
Chapter 2 – AT Commands
19

Related parts for MT5656ZDX