MT5656ZDX Multi-Tech Systems, MT5656ZDX Datasheet - Page 18

• Manufacturer Part Number: MT5656ZDX
• Description: MODEM V.92 DATA/FAX
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® ZDXr

Specifications of MT5656ZDX

• Data Format: V.92
• Interface: RS-232
• Voltage - Supply: 9V
• Mounting Type: Desktop
• Package / Case: 5.7" L x 4.3" W x 1.0" H (145mm x 109mm x 25mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1020

Command:
Description:
Result Code:
Command:
Description:
Values:
Result Codes:
Report Commands:
Multi-Tech Systems, Inc. AT Commands Reference Guide (S000273F)
-QCPC Force Full Startup Procedure Next Connection
-QCPS Enable Quick Connect Profile Save
This command causes the modem to use full startup procedures on the next connection
attempt regardless of the setting of the +PQC command. After this attempt, the modem
will select the startup procedure as defined by the +PQC command. If a shortened
startup procedure is enabled by +PQC, then the quick connect profile will also be
updated on the next connection attempt.
Syntax: -QCPC
OK
ERROR Otherwise
This command controls whether or not the modem will save the generated quick
connect profile.
Syntax: -QCPS=<value>
0, 1
<value>
OK 0 or 1 in V.92 Mode (+MS=V.92) and quick connect is enabled (+PSS = 0)
ERROR Otherwise
-QCPS?
-QCPS=? Reports supported range of parameter values
Decimal number corresponding to the desired operation.
0
1
Reports selected value
Do not allow the quick connect profile to be saved.
Allow the quick connect profile to be saved. Default
Chapter 2 – AT Commands
18