R5F61665N50FPV Renesas Electronics America, R5F61665N50FPV Datasheet - Page 866

• Manufacturer Part Number: R5F61665N50FPV
• Description: MCU FLASH 512K ROM 144-LQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8SX/1600r

Specifications of R5F61665N50FPV

• Core Processor: H8SX
• Core Size: 16/32-Bit
• Speed: 50MHz
• Connectivity: EBI/EMI, I²C, IrDA, SCI, SmartCard, USB
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 92
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Section 16 8-Bit Timers (TMR)
16.6
If the bits CKS2 to CKS0 in either TCR_0 or TCR_1 are set to B'100, the 8-bit timers of the two
channels are cascaded. With this configuration, a single 16-bit timer could be used (16-bit counter
mode) or compare matches of the 8-bit channel 0 could be counted by the timer of channel 1
(compare match count mode).
16.6.1
When the bits CKS2 to CKS0 in TCR_0 are set to B'100, the timer functions as a single 16-bit
timer with channel 0 occupying the upper 8 bits and channel 1 occupying the lower 8 bits.
(1)
• The CMF flag in TCSR_0 is set to 1 when a 16-bit compare match event occurs.
• The CMF flag in TCSR_1 is set to 1 when a lower 8-bit compare match event occurs.
(2)
• If the CCLR1 and CCLR0 bits in TCR_0 have been set for counter clear at compare match, the
• The settings of the CCLR1 and CCLR0 bits in TCR_1 are ignored. The lower 8 bits cannot be
(3)
• Control of output from the TMO0 pin by the bits OS3 to OS0 in TCSR_0 is in accordance with
• Control of output from the TMO1 pin by the bits OS3 to OS0 in TCSR_1 is in accordance with
16.6.2
When the bits CKS2 to CKS0 in TCR_1 are set to B'100, TCNT_1 counts compare match A for
channel 0. Channels 0 and 1 are controlled independently. Conditions such as setting of the CMF
flag, generation of interrupts, output from the TMO pin, and counter clear are in accordance with
the settings for each channel.
Rev. 2.00 Oct. 21, 2009 Page 832 of 1454
REJ09B0498-0200
16-bit counter (TCNT_0 and TCNT_1 together) is cleared when a 16-bit compare match event
occurs. The 16-bit counter (TCNT0 and TCNT1 together) is cleared even if counter clear by
the TMRI0 pin has been set.
cleared independently.
the 16-bit compare match conditions.
the lower 8-bit compare match conditions.
Setting of Compare Match Flags
Counter Clear Specification
Pin Output
Operation with Cascaded Connection
16-Bit Counter Mode
Compare Match Count Mode