R5F61665N50FPV Renesas Electronics America, R5F61665N50FPV Datasheet - Page 752

• Manufacturer Part Number: R5F61665N50FPV
• Description: MCU FLASH 512K ROM 144-LQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8SX/1600r

Specifications of R5F61665N50FPV

• Core Processor: H8SX
• Core Size: 16/32-Bit
• Speed: 50MHz
• Connectivity: EBI/EMI, I²C, IrDA, SCI, SmartCard, USB
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 92
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Section 14 16-Bit Timer Pulse Unit (TPU)
Rev. 2.00 Oct. 21, 2009 Page 718 of 1454
REJ09B0498-0200
Bit
7
6
5
4
Bit Name
TCFD
⎯
TCFU
TCFV
Initial
value
1
1
0
0
R/W
R
⎯
R/(W)* Underflow Flag
R/(W)* Overflow Flag
Description
Count Direction Flag
Status flag that shows the direction in which TCNT counts in
channels 1, 2, 4, and 5.
In channels 0 and 3, bit 7 is reserved. It is always read as 1
and cannot be modified.
0: TCNT counts down
1: TCNT counts up
Reserved
This bit is always read as 1 and cannot be modified.
Status flag that indicates that a TCNT underflow has occurred
when channels 1, 2, 4, and 5 are set to phase counting mode.
In channels 0 and 3, bit 5 is reserved. It is always read as 0
and cannot be modified.
[Setting condition]
When the TCNT value underflows (changes from H'0000 to
H'FFFF)
[Clearing condition]
When a 0 is written to TCFU after reading TCFU = 1
(When the CPU is used to clear this flag by writing 0 while the
corresponding interrupt is enabled, be sure to read the flag
after writing 0 to it.)
Status flag that indicates that a TCNT overflow has occurred.
[Setting condition]
When the TCNT value overflows (changes from H'FFFF to
H'0000)
[Clearing condition]
When a 0 is written to TCFV after reading TCFV = 1
(When the CPU is used to clear this flag by writing 0 while the
corresponding interrupt is enabled, be sure to read the flag
after writing 0 to it.)