R5F61665N50FPV Renesas Electronics America, R5F61665N50FPV Datasheet - Page 1321

• Manufacturer Part Number: R5F61665N50FPV
• Description: MCU FLASH 512K ROM 144-LQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8SX/1600r

Specifications of R5F61665N50FPV

• Core Processor: H8SX
• Core Size: 16/32-Bit
• Speed: 50MHz
• Connectivity: EBI/EMI, I²C, IrDA, SCI, SmartCard, USB
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 92
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

28.9
28.9.1
When the STBY pin is driven low, a transition is made to hardware standby mode from any mode.
In hardware standby mode, all functions enter the reset state and stop operation, resulting in a
significant reduction in power consumption. Data in the on-chip RAM is not retained because the
internal power supply to the on-chip RAM stops. I/O ports are set to the high-impedance state.
Do not change the states of mode pins (MD3 to MD0) while this LSI is in hardware standby mode.
28.9.2
Hardware standby mode is cleared by means of the STBY pin and the RES pin. When the STBY
pin is driven high while the RES pin is low, the reset state is entered and clock oscillation is
started. Ensure that the RES pin is held low until clock oscillation settles (for details on the
oscillation settling time, refer to table 28.2). When the RES pin is subsequently driven high, a
transition is made to the program execution state via the reset exception handling state.
28.9.3
Figure 28.8 shows an example of hardware standby mode timing.
When the STBY pin is driven low after the RES pin has been driven low, a transition is made to
hardware standby mode. Hardware standby mode is cleared by driving the STBY pin high,
waiting for the oscillation settling time, then changing the RES pin from low to high.
Hardware Standby Mode
Transition to Hardware Standby Mode
Clearing Hardware Standby Mode
Hardware Standby Mode Timing
Oscillator
RES
STBY
Figure 28.8 Hardware Standby Mode Timing
Rev. 2.00 Oct. 21, 2009 Page 1287 of 1454
settling time
Oscillation
Section 28 Power-Down Modes
Reset exception
handling
REJ09B0498-0200