HD64F2145BTE20 Renesas Electronics America, HD64F2145BTE20 Datasheet - Page 340

• Manufacturer Part Number: HD64F2145BTE20
• Description: IC H8S MCU FLASH 256K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of HD64F2145BTE20

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, IrDA, SCI, X-Bus
• Peripherals: PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 11 16-Bit Free-Running Timer (FRT)
11.7.4
When the internal clock is changed, the changeover may cause FRC to increment. This depends on
the time at which the clock is switched (bits CKS1 and CKS0 are rewritten), as shown in table
11.3.
When an internal clock is used, the FRC clock is generated on detection of the falling edge of the
internal clock scaled from the system clock ( ). If the clock is changed when the old source is high
and the new source is low, as in case no. 3 in table 11.3, the changeover is regarded as a falling
edge that triggers the FRC clock, and FRC is incremented. Switching between an internal clock
and external clock can also cause FRC to increment.
Table 11.3 Switching of Internal Clock and FRC Operation
No.
1
2
Rev. 3.00 Mar 21, 2006 page 284 of 788
REJ09B0300-0300
Timing of Switchover
by Means of CKS1
and CKS0 Bits
Switching from
low to low
Switching from
low to high
Switching of Internal Clock and FRC Operation
FRC Operation
Clock before
switchover
Clock after
switchover
FRC clock
FRC
Clock before
switchover
Clock after
switchover
FRC clock
FRC
N
N
CKS bit rewrite
N + 1
CKS bit rewrite
N + 1
N + 2