PIC18F85J90-I/PT Microchip Technology, PIC18F85J90-I/PT Datasheet - Page 29

• Manufacturer Part Number: PIC18F85J90-I/PT
• Description: IC PIC MCU FLASH 16KX16 80TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F85J90-I/PT

• Core Size: 8-Bit
• Program Memory Size: 32KB (16K x 16)
• Core Processor: PIC
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, LVD, POR, PWM, WDT
• Number Of I /o: 67
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TFQFP
• Controller Family/series: PIC18
• No. Of I/o's: 67
• Ram Memory Size: 2KB
• Cpu Speed: 40MHz
• No. Of Timers: 4
• No. Of Pwm Channels: 2
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: AUSART, EUSART, I2C, SPI
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 67
• Number Of Timers: 4
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DV164136, DM163030
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 12 Channel
• Package: 80TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 40 MHz
• Operating Supply Voltage: 2.5|3.3 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC162079 - HEADER MPLAB ICD2 18F85J90 64/80AC164328 - MODULE SKT FOR 80TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

3.5.13
3.5.14
3.5.15
© 2009 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15-2
bit 1
bit 0
W_GAIN
DELAY
R/W-0
R/W-0
MODE1_DEF
PHA_CAL_Status Register
STANDARD_W_RAW
CALIBRATION REGISTER: Calibration register status for offset, gain, LSB, and phase delay
1 = This register has been calibrated
0 = This register is NOT calibrated
Unimplemented: Read as ‘0’
STANDARD: Standard Phase Bit
1 = Standard Phase is THIS phase
0 = This phase is NOT the standard phase
I_RMS_OFF
W_GLSB
R/W-0
R/W-0
REGISTER 3-24:
Mode 1 default power-up settings. On power-up, this register will be read and placed
into the MOD1 register.
REGISTER 3-25:
The PHASE_A CAL_STATUS registers holds the calibration status for each individual
phase. Broken down by phase, these are the values that can be calibrated. Each bit
has the status of ‘0’ = Not calibrated, ‘1’ = Calibrated.
REGISTER 3-26:
This calibration register holds the energy value that was accumulated during the
standard phase measurement under calibration configuration C1. The software will
read this value when performing phase to phase gain matching during active power
calibration.
STANDARD_W_RAW
MODE1_DEF
PHA_CAL_STATUS
W = Writable bit
‘1’ = Bit is set
V_RMS_OFF
Name
VA_GAIN
R/W-0
R/W-0
Name
Name
Calculation and Register Description
I_RMS_GAIN V_RMS_GAIN
PHA_CAL_STATUS REGISTER
MODE1_DEF REGISTER
VA_GLSB
STANDARD_W_RAW REGISTER
R/W-0
R/W-0
Bits
16
Bits
48
Bits
16
Address
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
0x1B0
VAR_GAIN
Address
0x1B8
R/W-0
R/W-0
Address
0x1B2
R/W
Cof
I_RMS_GLSB
R/W
Cof
VAR_GLSB
R/W-0
R/W-0
R/W
Cof
x = Bit is unknown
V_RMS_GLSB
R/W-0
U-0
—
DS51884A-page 29
STANDARD
W_OFF
R/W-0
R/W-0
bit 8
bit 0