E-L6219 STMicroelectronics, E-L6219 Datasheet - Page 12

• Manufacturer Part Number: E-L6219
• Description: IC STEPPER MOTOR DRVR 24POWERDIP
• Manufacturer: STMicroelectronics
• Type: Stepper Motor Controllerr

Specifications of E-L6219

• Applications: DC Motor Driver, Stepper Motor Driver
• Number Of Outputs: 2/1
• Current - Output: ±750mA
• Voltage - Load: 10 V ~ 46 V
• Voltage - Supply: 4.75 V ~ 5.25 V
• Operating Temperature: -20°C ~ 85°C
• Mounting Type: Through Hole
• Package / Case: 24-DIP (0.300", 7.62mm)
• Product: Stepper Motor Controllers / Drivers
• Operating Supply Voltage: 10 V to 46 V
• Supply Current: 15 mA
• Mounting Style: Through Hole
• Motor Type: Full Bridge
• No. Of Outputs: 4
• Output Current: 1A
• Supply Voltage Range: 4.75V To 5.25V
• Driver Case Style: DIP
• No. Of Pins: 24
• Operating Temperature Range: 0°C To +70°C
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-1426-5; L6219

Application informations
3
12/16
Application informations
Some stepper motors are not designed for contin-uous operation at maximum current. As
the circuit drives a constant current through the motor, its temperature might increase
exceedingly both at low and high speed operation. Also, some stepper motors have such
high core losses that they are not suited for switch mode current regulation.
Unused inputs should be connected to proper voltage levels in order to get the highest noise
immunity. As the circuit operates with switch mode current regulation, interference
generation problems might arise in some applications. A good measure might then be to
decouple the circuit with a 100 nF capacitor, located near the package between power line
and ground. The ground lead between Rs, and circuit GND should be kept as short as
possible. A typical application circuit is shown in
similar else. To sense the winding current, paralleled metal film resistors are recommended
(R
Figure 5.
s
).
Typical application circuit
Figure
5. Note that C
t
must be NPO type or
L6219