LAN9500-ABZJ SMSC, LAN9500-ABZJ Datasheet - Page 23

• Manufacturer Part Number: LAN9500-ABZJ
• Description: IC USB 2.0 ETHER CTRLR 56-QFN
• Manufacturer: SMSC
• Type: Single Chip MAC and PHY Controllerr

Specifications of LAN9500-ABZJ

• Controller Type: USB 2.0 Controller
• Interface: MII
• Voltage - Supply: 3 V ~ 3.6 V
• Current - Supply: 78mA
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 56-QFN
• Product: Ethernet Controllers
• Number Of Transceivers: 1
• Standard Supported: IEEE 802.3 or IEEE 802.3u
• Data Rate: 10 Mbps or 100 Mbps
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 0 V
• Supply Current (max): 97.5 mA, 135.2 mA
• Maximum Operating Temperature: + 70 C
• Ethernet Connection Type: 10BASE-T or 100BASE-TX
• Maximum Power Dissipation: 0.6657 W (Typ)
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 638-1071

USB 2.0 to 10/100 Ethernet Controller
Datasheet
SMSC LAN950x Family
3.2
BUFFER TYPE
IS_5V
OCLK
OD12
ICLK
OD8
O12
AIO
PU
PD
O8
IS
AI
P
Buffer Types
Schmitt-triggered Input
5V Tolerant Schmitt-triggered Input
Output with 8mA sink and 8mA source
Open-drain output with 8mA sink
Output with 12mA sink and 12mA source
Open-drain output with 12mA sink
50uA (typical) internal pull-up. Unless otherwise noted in the pin description, internal pull-
ups are always enabled.
Note:
50uA (typical) internal pull-down. Unless otherwise noted in the pin description, internal
pull-downs are always enabled.
Note:
Analog input
Analog bi-directional
Crystal oscillator input pin
Crystal oscillator output pin
Power pin
internal resistors to drive signals external to the device. When connected to a load
that must be pulled high, an external resistor must be added.
on internal resistors to drive signals external to the device. When connected to a
load that must be pulled low, an external resistor must be added.
Internal pull-up resistors prevent unconnected inputs from floating. Do not rely on
Internal pull-down resistors prevent unconnected inputs from floating. Do not rely
Table 3.10 Buffer Types
DATASHEET
23
DESCRIPTION
Revision 1.0 (05-17-10)