MPC562MZP56 Freescale Semiconductor, MPC562MZP56 Datasheet - Page 863

• Manufacturer Part Number: MPC562MZP56
• Description: IC MPU 32BIT 56MHZ PPC 388-PBGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC562MZP56

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 56MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 64
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 388-BGA
• Processor Series: MPC5xx
• Core: PowerPC
• Data Bus Width: 32 bit
• Data Ram Size: 8 KB
• Interface Type: SCI, SPI, UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 56
• Number Of Timers: 22
• Operating Supply Voltage: 2.6 V to 5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 2 (10 bit, 32 Channel)
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Request inventory verification / Request inventory verification
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: No

Chapter 21
CDR3 Flash (UC3F) EEPROM
The MPC563 U-bus CDR3 (UC3F) EEPROM module is designed for use in embedded microcontroller
(MCU) applications targeted for high-speed read performance and high-density byte count requirements.
The MPC563 has one Flash module of 512 Kbytes but the MPC561 has no internal Flash; this chapter,
therefore, applies only to the MPC563. The UC3F array uses a single transistor Flash bit cell and is
configured for a module of 512 Kbytes (524,288 bytes) of non-volatile memory (NVM). The UC3F
module is divided into eight 64-Kbyte (65,536-byte) array blocks. Two blocks of the UC3F module
memory map may be subdivided into two smaller blocks: a 48-Kbyte (49,152-byte) block and a 16-Kbyte
(16,384-byte) block, or a 16-Kbyte block and a 48-Kbyte block.
The primary function of the UC3F EEPROM module is to serve as electrically programmable and erasable
NVM to store program instructions and/or data. It is a class of non-volatile solid state silicon memory
device consisting of an array of isolated elements, an electrical means for selectively adding and removing
charge to the elements, and a means of selectively sensing the stored charge in the elements. When power
is removed from the device, the stored charge of the isolated elements will be retained.
The UC3F EEPROM module is arranged into two major sections as shown in
is the UC3F array used to store system program and data. The second section is the memory interface (MI)
that controls operation of the UC3F array. The MI also serves as the interface between the UC3F array and
a bus interface unit (BIU) which connects the UC3F array to the U-bus.
Freescale Semiconductor
If the Flash arrays are disabled in the IMMR register (FLEN=0), then
neither the UC3F array or the UC3F control registers are accessible.
MPC561/MPC563 Reference Manual, Rev. 1.2
NOTE
Figure
21-1. The first section
21-1