MPC562MZP56 Freescale Semiconductor, MPC562MZP56 Datasheet - Page 819

• Manufacturer Part Number: MPC562MZP56
• Description: IC MPU 32BIT 56MHZ PPC 388-PBGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC562MZP56

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 56MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 64
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 388-BGA
• Processor Series: MPC5xx
• Core: PowerPC
• Data Bus Width: 32 bit
• Data Ram Size: 8 KB
• Interface Type: SCI, SPI, UART
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 56
• Number Of Timers: 22
• Operating Supply Voltage: 2.6 V to 5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 2 (10 bit, 32 Channel)
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Request inventory verification / Request inventory verification
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: No

Freescale Semiconductor
1
(a) If ENRX is disabled, no data will shift into the PPM.
(b) If ENRX is asserted while ENTX=1, the first data bit received will be the data that is transmitted from the PPM, and
2
(a) If ENTX is disabled, no data will shift out of the PPM and the PPM output signals, PPM_TX0 and PPM_TX1 will be
(b) If ENTX is asserted while ENRX = 1, the first data bits transmitted out of the PPM will be the data that was received
Enable RX.
not RX0. See
Enable TX.
high.
into the PPM. See
11:15
Bits
10
Figure
Name
CM
—
Figure
18-10. To receive the first data frame correctly, ENRX and ENTX should be set simultaneously.
Continuous Mode.
0 Non-continuous mode (default). Transmit and/or receive one data frame when STR = 1.
(STR will be automatically cleared by the PPM after the transfer of one data frame.)
1 Data will continuously be transmitted and/or received as long as Transmit and Receive
are enabled.
Refer to
Note: Ensure PPMPCR[STR]=0 when setting PPMPCR[CM]=1
Reserved
18-11. To transmit the first data frame correctly, set ENTX and ENRX simultaneously.
Table 18-3. PPMPCR Bit Descriptions (continued)
MPC561/MPC563 Reference Manual, Rev. 1.2
Table 18-5
SAMP[0:2]
100 – 111
Table 18-4. SAMP[0:2] Bit Settings
000
001
010
011
for more information.
Description
Every 16 TCLK
Every 2 TCLK
Every 4 TCLK
Every 8 TCLK
Sample Rate
Every TCLK
Peripheral Pin Multiplexing (PPM) Module
18-13